LOADCELLS ?0-1500 TONS
AVAILABLE FROM STOCK
CALIBRATIONS UP TO 1500 TONS TRACEABLE BACK TO NIST
Load Cells (Electrical Resistance)
The Model 3000 Load Cell is made from an annulus of high-strength steel or aluminum, with electrical resistance strain gages in a Wheatstone Bridge configuration. The load cell is designed primarily for use on tiebacks and?rockbolts, although they may be used during?pile load tests?and for monitoring loads in crosslot struts and?tunnel?supports, etc. In most cases, the load cells are used in conjunction with a hydraulic jack and bearing plates.
CALIBRATION OF HYDRUALIC JACKS AND LOADCELLS UP TO 1500 TONS
CALIBRATION RESULTS ARE TRACEABLE BACK TO NIST.
The loadcell is designed primarily for use on Pile Load Tests , Tieback Testing ?& Rock Bolt & Anchor Bolt Testing. They are used in conjunction with hydraulic jacks and Spherical Bearing Plate
Hydraulic Jack ?torque Wrench? Skidmore all tracaeable back to NIST
We have an? extensive inventory of both Hollow and Solid Loadcells available for Rental or Purchase ranging from 25 kips to 3000 kips in stock ?along with Digital Readout Boxes? capable of reading up to 3000 kips accurately . ?All Loadcells are calibrated in house at our facility and the calibration results are traceable back to the NATIONAL INSTITUTE OF STANDARDS (NIST). ?Whether its one of Our Loadcells or one of your own? let our qualified staff handle your Next Calibration
Know What You Want?
A large inventory of Enerpac, Power Team, Simplex, Freyssi Flat Jacks, Skidmore and Calibore equipment enables W.B. to answer any need rapidly and effectively. To discuss the best system for your bridge lowering, raising, or moving, call W. B. Equipment at 866-522-5464 or email email@example.com or firstname.lastname@example.org.
For more information about WB Equipment sales, rentals and service consult our website at https://www.wbequipment.com
WB EQUIPMENT PRODUCTS / SERVICES
Freyssi Flat Jacks Custom Hydraulic Power Units Customized Jacking Systems
- Custom Center Hole Cylinders
Custom Made Hydraulic Jacks Hoists Hydraulic Jacks Hydraulic Presses Hydraulic Pumps Hydraulic Torque Wrenches Hydraulic Jacks And Loadcell Calibration Material Handling Equipment Mechanical Jacks Pallet Trucks Pile Testing Equipment Pipe Jacking Re-Bar Grips Railroad Maintenance Equipment Strand Jacks Stressing Jacks Synchronous Lifting Systems Tie Back Testing Equipment
PRODUCTS / SERVICES ON THOMASNET.COM
Jacks Lifts Construction Equipment Testers Wrenches Calibration Services Calibrators Connectors Contractors’ Equipment Cylinders Gages Rebar Grips Hoists Hydraulic Equipment Jacking Services Lifters Machinery Maintenance and Repair Services Maintenance Equipment Material Handling Equipment Mining Equipment Pneumatic Systems
OTHER PRODUCTS by WB EQUIPMENT
Custom hydraulic cylinders and hydraulic jacks made to order. Huge inventory readily available. With loads from 1 – 2,000 tons and pressure rating of?100?– I0,000 psi we can make any hydraulic cylinder or hydraulic jack to your exact requirements. Whether it be single acting, double acting, lockout or centerhole let us provide you with the right jacking system to perform your task.
Custom power units and hydraulic pumps made to order. Electric, Gas, Diesel or Air Operated power units. Flow rates range from 1 GPM to 100 GPM. Our hydraulic pumps are available in over 1000 different configurations. They have a pressure rating of 10,000 psi.
Freyssi Flat Jacks are simple, practical devices for the civil or structural engineer wherever?the application or control of large forces is required. Flat jacks are frequently used in the solution of unforeseen problems such as in remedial measures or structural additions.
SYNCHRONOUS LIFTING SYSTEMS
The sensor extension is different from the Cylinder stroke value. The sensor extension is hooked to the load, and it has a value even when the Cylinder is collapsed. The potential applications of this system are numerous synchronized lifting levering, pushing, pulling and positioning using computer technology.of a synchronous lifting system?
The hydraulic press depends on?Pascal’s principle: the?pressure?throughout a closed system is constant. One part of the system is a?piston?acting as a pump, with a modest mechanical force acting on a small cross-sectional area; the other part is a piston with a larger area which generates a correspondingly large mechanical force. Only small-diameter?tubing?(which more easily resists pressure) is needed if the pump is separated from the press cylinder.
Power Team Monostrand Stressing Jacks are the most durable in the industry.
Monostrand Stressing Jacks suited for work on slab-on-grade where dirt, heat and high volume use take their toll.
Stressing jacks are mainly used on construction sites for stressing mono-strand anchors, and for the separate stressing of the strands of multistrand tendons.
We can provide customized jacking equipment to test driven piles from 1 -2000 tons. The systems can be manually, electrically or automatically controlled.
WB Equipment has delivered components for multiple jacking systems. Our knowledge of structural design, hydraulics, and automation means that we are capable of designing a complete jacking system with controls that allow for fully automated jacking and monitoring.
HYDRAULIC TORQUE WRENCH
A hydraulic torque wrenchis a?power tool?designed to exert?torque?on a?fastener?to achieve proper tightening or loosening of a connection through the use of?hydraulics. A?torque wrench?is applied to the nut either directly or in conjunction with an impact socket. Hydraulic torque wrenches apply a predetermined, controlled amount of torque to a properly lubricated fastener.
A?strand?jack (also known as strandjack) is a jack used to lift very heavy (e.g. thousands tons or more with multiple?jacks) loads for construction and engineering purposes.
Strand jacks can be used horizontally for pulling objects and structures, and are widely used in the oil and gas industry for skidded loadouts. Oil rigs of?38000?Te?have been moved in this way from the place of construction on to a?barge. Since multiple jacks can be operated simultaneously by hydraulic controllers, they can be used in tandem to lift very large loads of thousands of tons. Even the tandem use of two cranes is very difficult operation.
A?hoist?is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. It may be manually operated, electrically or pneumatically driven and may use chain, fiber or wire rope as its lifting medium.
The basic hoist has two important characteristics to define it: Lifting medium and power type. The lifting medium is either wire rope, wrapped around a drum, or load-chain, raised by a pulley with a special profile to engage the chain. The power can be provided by different means. Common means are hydraulics, electrical and air driven motors.
A?jack,?screwjack?or?jackscrew?is a mechanical device used as a?lifting device?to lift heavy loads or to apply great forces. A?mechanical jack?employs a?screw thread?for lifting heavy equipment.
A?hydraulic jack?uses?hydraulic power.?The most common form is a?car jack,?floor jack?or?garage jack, which lifts vehicles so that maintenance can be performed. Jacks are usually rated for a maximum lifting capacity (for example, 1.5?tons?or 3 tons). Industrial jacks can be rated for many tons of load.
Quick acting re-bar grips are available for pull out testing of reinforcing bars in concrete, (re-bar/reinforcement bars) used in construction of highways, bridges, and tunnels as well as rigging and other applications.
When used with hydraulic jack, user slips jack and grip over grouted re-bar and applies pressure to load. These re-bar grips come in sizes No. 4-18 and accommodate construction industry’s focus on repair, maintenance, and building of public infrastructure.
CUSTOM CENTER HOLE CYLINDERS
Custom made cylinders made to your specifications.?All cylinders calibrated and traceable back to NIST. Centerhole, ?locknut, ?low height, single acting, ?double acting,? long stroke.
- 0-1500 tons
- Centerhole sizes .75 inch to 15 inches
- Stroke ? inch to 10 feet
Enerpac is a global market leader in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads.?
Work site solutions for stressing, lifting and surfacing for railroad maintenance.
- Track Jacks
- Rail Pullers
- Lifting Jacks
- Truck Jacks
Wide range of high strength mechanical and hydraulic pullers
- Master Puller Sets
- Grip Puller Sets
- Cross Bearing Puller Sets
- Bearing Pullers
- Bearing Cup Pullers
- Posi Lock Pullers